Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8 Inch Oversize $21.68 Review

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8 Inch Oversize Review

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8 Inch Oversize Specification

List Price : $28.30
Our Price : $21.68
You Save : 23%
Product Information and Prices Stored: Jan 04, 2012 21:35:34
Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.

Available Stores

Check Price Now!

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8 Inch Oversize Feature

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to preformed holes with a very precise size and circularity
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• CNC length tools are generally shorter than other machine tools. The shorter length makes for a more rigid tool, which minimizes vibration at the higher rpms available with CNC machines
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Carbide resists abrasion and high cutting temperatures. It can run at higher speeds and is harder than high-speed steel

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8 Inch Oversize Overview

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes.

For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/8 Inch Oversize Specifications

Available Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jan 04, 2012 21:35:34
Cheapest mp3 player with fm radio On Sale Cheapest small mp3 players On Sale Cheapest rock band 4 On Sale

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Dowel Pin (0.3120)

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Dowel Pin (0.3120) Review

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Dowel Pin (0.3120) Specification

List Price : $69.40
Our Price : $50.33
You Save : 27%
Product Information and Prices Stored: Jan 02, 2012 23:51:19
Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.

Available Stores

Check Price Now!

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Dowel Pin (0.3120) Feature

• Straight flute reamers are recommended for general purpose reaming to make minor enlargements to preformed holes with a very precise size and circularity
• Straight flute reamers are good for use in through or blind holes without interruptions such as keyways (through holes extend through the entire workpiece, while blind holes do not)
• CNC length tools are generally shorter than other machine tools. The shorter length makes for a more rigid tool, which minimizes vibration at the higher rpms available with CNC machines
• Round shank tools are cylindrical and should be held in a good-quality toolholder in order to prevent the reamer from slipping in high torque applications, which can cause tool freeze, loss of accuracy, and tool damage
• Carbide resists abrasion and high cutting temperatures. It can run at higher speeds and is harder than high-speed steel

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Dowel Pin (0.3120) Overview

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision.

Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes.

For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 5/16 inch Dowel Pin (0.3120) Specifications

Available Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jan 02, 2012 23:51:19
Cheapest digital music downloads On Sale

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 1-1/4" Cutting Length, 9/16" Cutting Diameter

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 1-1/4" Cutting Length, 9/16" Cutting Diameter Review

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 1-1/4" Cutting Length, 9/16" Cutting Diameter Specification

List Price : $97.32
Our Price : $79.20
You Save : 19%
Product Information and Prices Stored: Jan 02, 2012 23:51:06
Usually ships in 24 hours

Available Stores

Check Price Now!

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 1-1/4" Cutting Length, 9/16" Cutting Diameter Feature

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 1-1/4" Cutting Length, 9/16" Cutting Diameter Overview

The Niagara Cutter CNC230 NC-style TiN-coated two-flute carbide square nose end mill has a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 1-1/4" Cutting Length, 9/16" Cutting Diameter Specifications

Available Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jan 02, 2012 23:51:06
Deals pepper set Buy Shop Deals wall water Buy Shop Deals clean pad Buy Shop

Check Out Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/2" Cutting Length, 3/4" Cutting Diameterfor $150.48

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/2" Cutting Length, 3/4" Cutting Diameter Review

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/2" Cutting Length, 3/4" Cutting Diameter Features

List Price : $189.25
Our Price : $150.48
You Save : 20%
Product Information and Prices Stored: Jan 02, 2012 23:51:04
Usually ships in 24 hours

Available Stores

Check Price Now!

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/2" Cutting Length, 3/4" Cutting Diameter Feature

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Four flutes produce a better finish than fewer flutes
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/2" Cutting Length, 3/4" Cutting Diameter Overview

The Niagara Cutter CNC430 TiN-coated carbide NC-style square nose end mill has four flutes and a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/2" Cutting Length, 3/4" Cutting Diameter Specifications

Available Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jan 02, 2012 23:51:04
Cheapest personal cutting machine On Sale Cheapest hunting deer games On Sale

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/4" Cutting Length, 5/8" Cutting Diameter

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/4" Cutting Length, 5/8" Cutting Diameter Review

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/4" Cutting Length, 5/8" Cutting Diameter Features

List Price : $129.21
Our Price : $107.88
You Save : 17%
Product Information and Prices Stored: Jan 02, 2012 23:51:03
Usually ships in 24 hours

Available Stores

Check Price Now!

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/4" Cutting Length, 5/8" Cutting Diameter Feature

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Four flutes produce a better finish than fewer flutes
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/4" Cutting Length, 5/8" Cutting Diameter Overview

The Niagara Cutter CNC430 TiN-coated carbide NC-style square nose end mill has four flutes and a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1-1/4" Cutting Length, 5/8" Cutting Diameter Specifications

Available Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jan 02, 2012 23:51:03
Deals blog books Buy Shop Deals lean in Buy Shop