Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter

The Niagara Cutter CNC230 NC-style TiN-coated two-flute carbide square nose end mill has a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter CNC230 Carbide End Mill, NC Tolerance, TiN Coated, 2 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter

Model Of Item : 97415
Product Brand : Niagara Cutter

Product Rating :	Update Here!!
Popular Rating :	Update Here!!
Reviews Rating :	Update Here!!
Customer Rating :	Update Here!!

Available : In Stock

Buy Now

See All Of Product Brand :
Niagara Cutter

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

Available at Amazon : Check Price Now!

*** Product Information and Prices Stored: Apr 14, 2012 04:20:14 ***

Please Check Update Here!!

My web is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, endless.com, smallparts.com or myhabit.com. Disclaimer: Certain content that appears on this site comes from Amazon Service LLC. This content is provided 'AS IS' and is subject to change or removal at any time. Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.

Deals the rat shop Buy Shop Deals single dvd Buy Shop

Kissaki Pro Hair Cutting Kinsuji 5.7" Diamond Series Hitashi ATS-314 Cobalt Shears Barber Scissors

Kinsuji 5.7" Diamond Series Shears with the comfortable drop finger handle, featuring the ultra sharp slide cutting convex edge made from the highest Quality Authentic Japanese Hitachi ATS-314 Cobalt Alloy Stainless Steel (Rockwell Hardness of 61 - 63). The Kissaki cutting blades are shaped using CNC technology, which allows for very fine tolerances in grinding and sharpening of shears and then hand honed to to achieve precision tolerances not otherwise attainable on a normal convex edge.  These shears also feature the highly popular clicker tension adjustment knob that is user friendly for simple adjustment, and the most comfortable feel for the perfect cut.Kissaki Diamond Series 5.7" Kinsuji Shears are Versatile for all techniques including slide cutting, finishing and blunt cutting! The extremely slender, RAZOR SHARP blades are also excellent for fine design and slither cutting!  This Professional shear is very sleek, slender and comfortable for the stylist who prefers a medium-size shear and demands the special and extraordinary.All Kissaki Shears come with our beautiful custom shears case including lubricant, finger sizing ring inserts and a leather cleaning - polishing cloth. All Kissaki Shears have a Lifetime Warranty against defects in parts, materials & workmanship.

Kissaki Pro Hair Cutting Kinsuji 5.7" Diamond Series Hitashi ATS-314 Cobalt Shears Barber Scissors

Product Brand : Kissaki

Product Rating :	Update Here!!
Popular Rating :	Update Here!!
Reviews Rating :	Update Here!!
Customer Rating :	Update Here!!

Available : In Stock

Buy Now

See All Of Product Brand :
Kissaki

• Lifetime Warranty
• ergonomic drop finger handle
• Authentic Japanese Hitachi ATS-314 Cobalt Alloy Stainless Steel
• Rockwell Hardness of 61 - 63
• 5.7"

Available at Amazon : Check Price Now!

*** Product Information and Prices Stored: Apr 10, 2012 12:48:23 ***

Please Check Update Here!!

My web is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, endless.com, smallparts.com or myhabit.com. Disclaimer: Certain content that appears on this site comes from Amazon Service LLC. This content is provided 'AS IS' and is subject to change or removal at any time. Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.

Deals case for mp3 Buy Shop

5x 60° Summa D Sign Vinyl Cutter Cutting Plotter Blade

Shipping: Quality is Guarantee, Item will be shipped from china and will take about 10-20 workingdays to arrive.

5x 60° Summa D Sign Vinyl Cutter Cutting Plotter Blade

Product Brand : Uniqstore

Product Rating :	Update Here!!
Popular Rating :	Update Here!!
Reviews Rating :	Update Here!!
Customer Rating :	Update Here!!

Available : In Stock

Buy Now

See All Of Product Brand :
Uniqstore

• Standard Blade for Summa D sign Vinyl Cutter or Cutting Plotter
• High quality and extra long life
• Angle: 60°
• Package with a Safe Plastic Box: 5pc

Available at Amazon : Check Price Now!

*** Product Information and Prices Stored: Apr 01, 2012 17:50:13 ***

Please Check Update Here!!

My web is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, endless.com, smallparts.com or myhabit.com. Disclaimer: Certain content that appears on this site comes from Amazon Service LLC. This content is provided 'AS IS' and is subject to change or removal at any time. Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.

Cheapest guitar hero guitar pc On Sale Deals 302 steel Buy Shop

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter

The Niagara Cutter CNC430 TiN-coated carbide NC-style square nose end mill has four flutes and a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, TiN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter

Model Of Item : 97507
Product Brand : Niagara Cutter

Product Rating :	Update Here!!
Popular Rating :	Update Here!!
Reviews Rating :	Update Here!!
Customer Rating :	Update Here!!

Available : In Stock

Buy Now

See All Of Product Brand :
Niagara Cutter

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Four flutes produce a better finish than fewer flutes
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

Available at Amazon : Check Price Now!

*** Product Information and Prices Stored: Mar 31, 2012 13:35:26 ***

Please Check Update Here!!

My web is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, endless.com, smallparts.com or myhabit.com. Disclaimer: Certain content that appears on this site comes from Amazon Service LLC. This content is provided 'AS IS' and is subject to change or removal at any time. Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.

Cheapest cricut cutting On Sale

Amana Tool 45412 Straight Plunge 5/16-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit

? New generation of high wear outstanding carbide? New superior geometric design? New advanced automatic grinding technology that improves the carbides' resistance  to wear? Super clean cuts? 200% longer life time even when working with abrasive materials? Cost effective

Amana Tool 45412 Straight Plunge 5/16-Inch Diameter by 1-Inch Cutting Height by 1/2-Inch Shank Solid Carbide Router Bit

Model Of Item : 45412
Product Brand : Amana Tool

Product Rating :	Update Here!!
Popular Rating :	Update Here!!
Reviews Rating :	Update Here!!
Customer Rating :	Update Here!!

Available : In Stock

Buy Now

See All Of Product Brand :
Amana Tool

• New superior geometric design for super clean cuts
• 5/16-inch cutting diameter
• 1-inch cutting height, 2-3/4-inch length
• 1/2-inch shank, 2 flute
• Carbide tipped, industrial quality

Available at Amazon : Check Price Now!

*** Product Information and Prices Stored: Mar 30, 2012 12:56:08 ***

Please Check Update Here!!

My web is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, endless.com, smallparts.com or myhabit.com. Disclaimer: Certain content that appears on this site comes from Amazon Service LLC. This content is provided 'AS IS' and is subject to change or removal at any time. Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.

Cheapest mp3 and radio On Sale Cheapest am radios On Sale

best buy products Royal Products 10476 Heavy Duty 6 MT Quad-Bearing Live Center With CNC Point for $1,072.51

Royal Products 10476 Heavy Duty 6 MT Quad-Bearing Live Center With CNC Point Review

Royal Products 10476 Heavy Duty 6 MT Quad-Bearing Live Center With CNC Point Specification

List Price : $1,442.00
Our Price : $1,072.51
You Save : 26%
Product Information and Prices Stored: Jan 18, 2012 01:17:35
Usually ships in 2 to 4 weeks

Available Stores

Check Price Now!

Royal Products 10476 Heavy Duty 6 MT Quad-Bearing Live Center With CNC Point Feature

• Three precision angular-contact bearings with a locknut to form a rigid, preloaded assembly; Extended point provides extra clearance
• Roto-Shield coolant slinger and upgraded seal provide outstanding bearing protection for extended operating life
• Body and point are hardened and ground for accuracy and durability
• Standard point angle is 60 degree; +/- 0.00005" TIR guaranteed
• 1 year warranty against failure due to manufacturing defects

Royal Products 10476 Heavy Duty 6 MT Quad-Bearing Live Center With CNC Point Overview

An excellent choice for precision turning, grinding, and hard-turning. Precision, preloaded bearing assembly consisting of three matched angular contact bearings provides exceptional rigidity and accuracy. Low-profile head and extended point combine to offer superior tool clearance. The point extends into the body where it is supported by a needle roller bearing, which further increases rigidity, reduces point deflection, and dampens vibration. Exclusive Roto-Shield coolant slinger and upgraded seal provide outstanding bearing protection for extended operating life. Body and point are hardened and ground for accuracy and durability. Guaranteed accurate to +/-0.00005" TIR or better. 1 year warranty against failure due to manufacturing defects.

Royal Products 10476 Heavy Duty 6 MT Quad-Bearing Live Center With CNC Point Specifications

Available Check Price Now!

Related Products

Customer Reviews

*** Product Information and Prices Stored: Jan 18, 2012 01:17:35
Deals orange press Buy Shop Deals books craft Buy Shop Deals making a soap Buy Shop